2 Sours, 1 Batch (Sort of)

Right when I left Michael Tonsmiere’s talk on Hoppy Sour Beers at HomebrewCon I knew a hoppy sour was going to be on my to brew list in the near future. Well, here goes nothing. I based my recipe off of his that he shared with us at his talk. I brewed 11 gallons of wort and split the batches, 6 gallons in one carboy, 5 in another. The 6 gallons will become the Hoppy Sour Beer and the 5 gallons will be a Gose (by request of the wife).

Carboys sitting in my hot storeroom

Carboys sitting in my hot storeroom

85% 2 Row
15% Flaked Wheat

Mashed at 152

Boiled for 60 minutes, cooled to approximately 105 degrees, racked to each carboy.

Both carboys were soured for approximately 24 hours. My pH meter was a cheap one and it read 3.5 or so. Hey it tasted tart enough for my taste, I continued on. I’ll need to purchase a meter that I can rely on. This one is not very reliable at all.

Hoppy Sour (6 gallon carboy)

Soured with Omega Lacto Blend
I racked the 6 gallon carboy back into kettle, brought to 180, whirlpooled hops for 15 minutes with the following hops.

  • 1 oz Citra
  • 1 oz Simcoe
  • 1 oz Mosaic

Omega Lacto Blend, yes I saved this cake, will sour with it again.

WLP644 Sacc Brux Trois for “primary fermentation.”

Dry hopped for 7 days with the same amount of hops as above.

Before I dry hopped the beer, I tasted them and the beer was just a touch bitter with a quenching tartness. The hop flavor was good, but not as quite as quenching as the sample I tasted at HomebrewCon. After I dry hopped the beers I got an overwhelming bitterness and the sourness clashed together. Very interesting that I got some bitterness from the dry hopping. I believe I am going to try to blend some of the Gose into this beer to see if it will round out that bitterness. I’m pretty upset with that, but hey you learn from these mistakes. I love the hop flavor and aroma though. Next time I will bring the wort up to 180 and start the whirlpool, once the beer is well below 180 from the whirlpooling I’ll add my hops so I don’t extract as much bitterness from the hops. I will also only dry hop with a half an ounce of the hops this time. I believe 3 ounces for this was a bit much. I’m not sure what I was thinking.

I carbonated this beer with my new Blichmann QuickCarb. I’m going to write a review on it soon. I served this beer at a local food event. I believe calling this a Hoppy Sour turned people off and it they really weren’t interested in it. That’s ok thought because it is not
my best.

Gose (5 gallon carboy)

Soured with 2 Mango Good Belly Plus Shots

Racked this beer back to a kettle and brought it up to 180, I then added 15 grams of kosher salt and 10 grams of ground coriander. Before anyone gets onto me about not using whole, I know, I know. None of my grocery stores in town have whole coriander (ooof, I forgot to check the Asian Market, I will check there). That is the reason I backed off the coriander some because I knew the ground would be overwhelming. When grinding whole coriander in a mortar and pestle, it is meant to go into a beer.

I used US05 for “primary fermentation.”

This beer is in my kegerator with 12 PSI attached to it and I’m waiting patiently for this one to carb. I didn’t need this one for an even like I had the hoppy sour beer slated for.

Experimental New England IPA

I’ve been itching to release this post for some time now. As I am writing and editing this post I am working on gathering some statistics to put in here so you will have some info to chew on. This brew was probably my most documented brew day I have ever done and I must say it is pretty nice to look back and read what all I did for it. I took lots of photos of the entire process. The reason I did this experiment is for the Experimental Brewing Podcast, it made me brew a beer I’ve been wanting to brew for some time, but really just didn’t know where to start. Where I sorta failed at this experiment is that I actually used a Conan Yeast strain, rather than Wyeast 1318 London Ale III that the recipe suggested. I hope it doesn’t throw them off with their data.

2016-06-02 21.37.38

2016-06-04 18.21.53-1

 

 

 

 

 

 

 

 

 

Brew Day: June 4, 2016

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
11 gal 60 min 38.0 IBUs 4.6 SRM 1.055 1.013 5.5 %
Actuals 1.053 1.01 5.6 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
American IPA 21 A 1.056 - 1.07 1.008 - 1.014 40 - 70 6 - 14 2.4 - 2.9 5.5 - 7.5 %

Fermentables

Name Amount %
Pale Malt (2 Row) US 19 lbs 82.61
Munich 10L (Briess) 2 lbs 8.7
Oats, Flaked 2 lbs 8.7

Hops

Name Amount Time Use Form Alpha %
Warrior 0.5 oz 60 min Boil Pellet 15.9
Centennial 1 oz 5 min Boil Pellet 10
Citra 1 oz 5 min Boil Pellet 14.1
Amarillo 1 oz 20 min Aroma Pellet 9.2
Centennial 1 oz 20 min Aroma Pellet 10
Citra 1 oz 20 min Aroma Pellet 14.1
Amarillo 4 oz 0 min Dry Hop Pellet 9.2
Centennial 4 oz 0 min Dry Hop Pellet 10
Citra 4 oz 0 min Dry Hop Pellet 14.1

Miscs

Name Amount Time Use Type
Calcium Chloride 17.25 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 17.25 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
American Ale (1056) Wyeast Labs 75% 60°F - 72°F
DIPA Ale (OYL-052) Omega 76% 65°F - 72°F

Mash

Step Temperature Time
Mash In 152°F 60 min

Notes

Dry Hopped on 6/25/2016

Wort is chilled in the the carboy ready for pitch

6/6/2016 – 7 AM – Still no sign of activity from the Omega Yeast

6/5/2016 Evening after pitching. Wyeast 1056 took off first.

6/6/2016 – 6 PM – Omega Yeast has taken off!

6/7/2016 – 7AM – Both beers happily fermenting away

6/7/2016 – 7 PM – This is smelling super good

The lapse of time in between these two pictures was Homebrew Con. Ok guys, it was my first one to attend, I apologize for not documenting them daily while I was off drinking a copious amount of beer.

6/12/2016 – Activity is slowing down quite a bit

6/17/2016 - Looks like it's done with the super active fermentation now

6/17/2016 – Looks like it’s done with the super active fermentation now

6/25/2016

Dry hopped each primary fermenter with:
56 g. Amarillo (7.2% AA)
56 g. Centennial (10.0% AA)
56 g. Citra (12.5% AA)

7/3/2016 – These samples are from the carboy. Can you tell which one is which?

7/3/2016
Keg conditioned each keg with 3.6 ounces of table sugar and 3/4 cups of water. Simmered for 5 minutes.
Wyeast 1056 FG – 1.010
Omega OLY-52 FG – 1.012

7/18/2016
The kegs went into the kegerator to chill

7/21/2016 – First Triangle Test

Omega DIPA on the left, Wyeast on the Right

A little stats here for ya. Out of 25 total testers 20 of them picked the correct sample. I must know some people with really good palettes. Of the people who commented, it seemed that the Wyeast 1056 sample was the favorite among the two samples. Personally I like the Omega DIPA because it has a softer mouthfeel and doesn’t come across as sharp as the 1056. Me personally I think I get a slight touch of diacetyl in the 1056 sample. No one else mentioned this, but I would have written that down on a BJCP score sheet. There was a BJCP judge that tasted the samples and he didn’t mention the diacetyl either, so maybe I’m really sensitive to it.

This was a really fun experiment. I plan on doing more of these for sure. I appreciate the Experimental Brewing Podcast for pushing me over the edge and doing something scientific like this. Lets me geek out even more on beer.

Wit Gone Indie

2016-05-03 18.12.12Michael Tonsmeire wrote the book on American Sour Beers. He also has a pretty slamming blog (The Mad Fermentationist). Y’all should give it a follow. Last summer he posted his Indië Wit recipe, I thought it sounded amazing. I’m not a huge IPA brewer, but I have made my share of them. Anyways I wanted a spring time beer and this is exactly what I wanted. I am very pleased on how this turned out.

Tasting Notes

Aroma- Sweet oranges (almost orange juice like), tropical fruit and citrus hop aromas. The witbier component is a bit tough to pick up in the background, but it’s there. The spices and hops are sharing the monkey bars on the playground, but the hops are the alpha of the two.

Appearance- Very cloudy, gold in color, white fluffy head that’s retaining

Flavor- very large orange, tropical and citrus hop flavors, pepper, coriander, bready malt on the verge of showing some tartness, your sour heads would even think this is tart at all. It is more of a Witbier with a large hop character. The hop stand didn’t add very much bitterness. Which leads to a very drinkable beer.

It is very interesting how different both batches are. they are both very similar, but the kegged beer and the bottled beer are different. Personally I believe the kegged version has much more hop flavor than the bottled version. I might need to do a side by side comparison soon and up date this post.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
11.5 gal 60 min 72.4 IBUs 3.5 SRM 1.048 1.012 4.6 %
Actuals 1.046 1.01 4.7 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Specialty IPA 21 B 1.05 - 1.085 1.008 - 1.018 40 - 100 5 - 40 2.2 - 2.9 3 - 10 %

Fermentables

Name Amount %
Pale Malt (2 Row) US 11 lbs 53.01
White Wheat Malt 5 lbs 24.1
Wheat, Flaked 4 lbs 19.28
Acidulated (Weyermann) 12 oz 3.61

Hops

Name Amount Time Use Form Alpha %
Warrior 26 g 60 min Boil Pellet 15.6
Citra 56.7 g 20 min Aroma Pellet 14.1
Mosaic (HBC 369) 56.7 g 20 min Aroma Pellet 11.5
Simcoe 56.7 g 290 min Aroma Pellet 11.6
Citra 56.7 g 9 days Dry Hop Pellet 14.1
Mosaic (HBC 369) 56.7 g 9 days Dry Hop Pellet 11.5
Simcoe 56.7 g 9 days Dry Hop Pellet 11.6

Miscs

Name Amount Time Use Type
Coriander Seed 12.00 g 5 min Boil Spice
Blood Orange Peel 1.00 oz 5 min Boil Spice

Yeast

Name Lab Attenuation Temperature
French Saison (3711) Wyeast Labs 80% 65°F - 77°F

Mash

Step Temperature Time
Mash In 158°F 45 min

Notes

Heated 7 gallons of water
Mashed at 158 degrees for 60 minutes
Raised mash temp to 170
Recirculated at mash out temp for approximately 20 minutes

Added gypsum at 60 minutes

At flame out added orange peel, coriander, and all whirlpool/hop stand hops. Whirlpooled for 20 minutes started wort chiller.

One carboy filled to 5.5 gallons
- Two yeast packs (dated 11/29/2015 & 2/8/2016)

One carboy filled to 4.5 gallons
- One yeast pack (dated 2/8/2016)

Started fermentation around 66 degrees, plugged in heat lamp and set controller to 70 degrees.

3/17/2016 – Dry Hopped both carboys
Carboy 1
28 g. Citra (14.1% AA)
28 g. Mosaic (11.5% AA)
28 g. Simcoe (11.6% AA)

Carboy 2
28 g. Citra (14.1% AA)
28 g. Mosaic (11.5% AA)
28 g. Simcoe (11.6% AA)

3/26/2016
Bottled one carboy (Gold Medal winner)
Kegged other

Busty Porter

2016-01-01 13.57.02I’ve built myself a new brewing system. It has been nothing but trial and error with it. The gas portion of the system is giving me a lot of its and I’m starting to get a twitch I believe. But all that aside, I am still making beer. Now that I’ve upgraded I’m making a lot more beer these days. Since I can brew double batches I’ve been pitching different yeasts into each carboy. It’s been very interesting to see how each one has come out.

What did I want to brew first on my new direct fired and recirculating mash getup? Something dark and something drinkable. I’m going to brew me a robust porter. I love a good porter. Here is to hoping the first brew on my new system quaffable.

Yes, I have slacked on getting my blogs up on the site. I’m going to work on a lot of them here in the next few days to get them out and caught up. Yes, this brew date was on New Years Day. But I’m still drinking this beer. I’ll have tasting notes up soon.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
12 gal 60 min 44.1 IBUs 36.0 SRM 1.061 1.013 6.3 %
Actuals 1.058 1.01 6.3 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Robust Porter 12 B 1.048 - 1.065 1.012 - 1.016 25 - 50 22 - 35 1.8 - 2.5 4.8 - 6.5 %

Fermentables

Name Amount %
Pale Malt (2 Row) US 21 lbs 73.68
Munich Malt 3 lbs 10.53
Caramel/Crystal Malt - 40L 2 lbs 7.02
Chocolate Malt 1.5 lbs 5.26
Black (Patent) Malt 1 lbs 3.51

Hops

Name Amount Time Use Form Alpha %
East Kent Goldings (EKG) 3.5 oz 60 min Boil Pellet 4.5
East Kent Goldings (EKG) 1.5 oz 60 min Boil Pellet 4.5
Willamette 1.5 oz 60 min Boil Pellet 5.1

Yeast

Name Lab Attenuation Temperature
California Ale (WLP001) White Labs 77% 68°F - 73°F
Edinburgh Ale (WLP028) White Labs 73% 65°F - 70°F

Mash

Step Temperature Time
Mash In 152°F 60 min

Notes

Starkville Water Profile - Water machine in Wal-Mart
Recirculated Mashed at 152 degrees for 60 minutes.
Batched sparged at 170 degrees.

Brewed on 1/1/2016

Pithced WLP001 into one carboy
Pitched WLP028 into the other.

Diacetyl: What the ale is wrong?

The scientific definition of diacetyl is a vicinal diketone with the molecular formula C4H6O2. In simpleton terms, it is a movie theater butter or butterscotch flavor. Yes, I have heard that movie theaters actually are using diacetyl when they ask you if you want your popcorn buttered. Is this fact? I’m not saying no, but I wouldn’t doubt it. But diacetyl is a common problem in homebrew. I have even had a lot of commercial examples that have loads diacetyl. But this is is not a flaw in some English style beers.

So how does diacetyl get in our beer? Diacetyl is produced during fermentation.  It starts to show up in the low krauesen phase. Huh? Low krauesen? This is the phase of fermentation when the yeast has finished growing and you’ll start seeing a foam wreath develop in the middle of the surface.  The yeast has not completely adapted to the environment and ready to start metabolizing those sugars you worked so hard to create.  Ok, maybe I need to go in depth on the yeast development cycle one day.  It is quite interesting what all those yeasts do during fermentation.  Back to diacetyl.  It can start showing up in the low krauesen phase and the yeast will start cleaning up by products that were developed during late krausen phase.

Ok, so now we know when diacetyl can show up in our beer. Now why am I tasting it in my beer Well, it can be a lot of things.

  • If you have a long lag phase (from when you pitch to when you get to the growth phase of fermentation) which can be caused from poor yeast health or insufficient aeration.
  • Some bacteria strains can cause diacetyl production. Here is where I use that sanitation word. Any homebrewer has heard sanitation probably 3.7 million times. Seriously. Sanitation, so that’s 3,700,001 times.
  • Premature racking out of primary. See earlier? You might not be able to see when your beer in late krauesen. So make sure your beer is done fermenting by checking your final gravity for a couple days straight to make sure your gravity is not dropping.
  • Under pitching. Huh? So you’ve never made a yeast starter? You’ll improve your beer ten fold by making yeast starters. Take the plunge, get a stir plate and you can make sure you’ll have enough yeast to pitch.
  • Too much oxygen. Wait one minute. I bet you remember me mentioning earlier about insufficient aeration? Well of course I did, there can also be too much. Yeast absorb all the oxygen it can during the growth phase. Well if there is too much oxygen there will still be oxygen lingering when the fermentation is over. Most homebrewers don’t filter their beer. If there is still oxygen left over, the yeast will still be feeding off of it and still trying to go through fermentation phases. Also minimize oxygen exposure after fermentation started, e.g. while racking to the keg or bottling bucket.
  • Increase your fermentation temperature. That is use a diacetyl rest. A diacetyl rest is a common practice for lager beers. When you warm up the yeast it becomes a bit more active and it will help clean up the yeast. You can also use a diacetyl rest for ales, but most of the time you are fermenting at the correct temperature for the diacetyl to be cleaned up.
  • Use a less flocculant yeast strain. Flocculation is the state of yeast of being clumped together and falling out of solution. If the yeast is still in suspension it will be a little more efficient when cleaning up diacetyl.

Diacetyl will most of the time be a flaw in lagers, but not in every ale style. It is acceptable in a Czech Pale Lager, English and Scottish style beers and also a dry stout.

I’m sure we have all had this problem show up in our beers. This is one of the major issues that I fight with, especially since I started doing lagers.

Relax, don’t worry, have a homebrew.

References:
How to Brew
Beer Judge Education Course

Deciphering Judge Comments

I think I’m going to do a series on the blog about this. I just entered two more beers that have been in competitions this year. This will be something good to write about in an upcoming blog post.

I’ve entered quite a few homebrew competitions, and I have really tried to take the feedback as constructive criticism. It is hard to take when someone rips your beer. I’ve sent soured beers, flawed beers, and some good beers. I have been fortunate to get some good feedback, but I have never really been told your beer sucks, which is a good thing. When studying for the BJCP, I learned that the overall impression is not just your impression, but using your brewing knowledge to suggest what the brewer can do to make that beer a better fit into the style in which it was entered. What will make this beer a 50 point beer. I’ll give you a couple examples of what judges have said on my sheets, and just maybe this will help lure you to enter more competitions.

Category 4C: Schwarzbier – Two Sides of the Schwarz

2013 National Homebrew Competition

Judge 1 – National – A fairly nice beer that suffers from a little diacetyl. Aside form a diacetyl rest at 68 degrees F 75% of the way through fermentation (75% x (OG – FG)) maybe aerate more and/or lager longer. Otherwise nicely done.

Judge 2 – Certified – This is a good beer. That has balance between the base malt and the roast. Also has enough hops to balance the malt.

2013 War of the Wort

Judge 3 – Recognized – Light smooth roast with malty richness made a very nice beer. Hop character was a little low in flavor and ok to be hidden in the aroma. Would like to see a little more hop flavor, although with a lighter roasted schwarz this is not completely a bad thing. Very nice beer!

Judge 4 – Certified – Enjoyable well brewed schwarz. I think the bitterness is a tad too intense. Suggest reducing hop bitterness and backing down a little on the sharpness of the roast. Very dry.

Let me note, these entries were from the same keg. So technically unless something was wrong with the bottle, these should have been the same beer. But you know that finicky home brew. So what can I do to make this beer fit better into style? One judge noted diacetyl. Shall I worry too much about the diacetyl that was noted? Not really since I should make my diacetyl rest good practice. It wasn’t a major flaw noted. So what did the judges tell me that will make this a 50 point beer? Not too much. Judges 3 and 4 both noted hop character, but in different aspects. This beer has been lagering since January so of course hop flavors would have dropped out. Judge 4 was the only one to note hop bitterness was harsh. Was it hop bitterness, or did I extract too much roasted bitterness? To conclude, they all four thought it was a well brewed beer, but it wasn’t a great beer. What can I do to make it great? Other than the detected diacetyl, which I do not typically detect in my beers until someone tells me. Mirror? Hello? Then the more hop character. This style has a low to moderate hop character, so I do not believe I will change my hop schedule. My major issue that I get out of these four comments is the diacetyl I need to work on my lagering practice. Patience is not my friend, so that means lagers aren’t my friends either, but I do enjoy drinking a well brewed lager.

Category 13C – Oatmeal Stout – Quaken Oaten Stout

2013 Bluff City Extravaganza

Judge 1 – Non-BJCP – a very drinkable beer. I would have liked some more sweetness and or oatmeal character. As the beer warmed I noticed a slightly tinny/metallic notes though were not overwhelming.

Judge 2 – Non-BJCP – Beer suffers from off flavored and over carbonation. Not sensing oatmeal character. Could be a good beer with tweaking.

2013 War of the Wort

Judge 3 – Provisional – Good beer very drinkable. Maybe try changing mash temps to try to get more unfermentable sugars to balance the bitterness. I would like more oatmeal character too.

Judge 4 – Certified – the beer was not too far off style, but balance was problematic. Tweaking of recipe or procedure is recommended. Needs more oatmeal sweetness/slickness.

These are two different batches, so technically these are different beers, but I want to show you that the judges’ comments are not too different. But it is the same recipe with similar ingredients I could not get Maris Otter for the War of the Wort batch, so I did substitute the base malt for what the home brew shop had in stock. I did have a slight issue with the beers sent to the Extravaganza being over-carbed. Was my fermentation not complete? Apparently not. That was a ding there. That beer sat in the carboy for 3 weeks, guess I needed to raise my fermentation temps up towards the end of fermentation. I am baffled by the way  WLP002 flocculates and it appeared to finish pretty quickly.

I have had trouble getting that oatmeal sweetness/slickness that judge 4 mentioned. Body has been a problem for me with this beer. I need more dextrines. Is the way I handle my oats wrong? I use Quaker oats from the grocery store. Should I use quick oats? Should I cook the oats like I would for breakfast before I mash? I do bake the oats to try to bring out more nutty characters. I will need to ramp up my saccrification rest to 156, I normally mash at 154. This will also help get those long chained sugars I need for more dextrinous wort. This is a beer I want to to nail down as I really enjoy drinking this style.

I know this beer is not a 30 point beer in the oatmeal stout category. It fared better in the War of the Wort. My goal is to perfect this recipe. I will.

How many beers have you let your friends drink and they tell you it’s awesome? It’s great? Well this oatmeal stout, no one has told me to my face it is not quite right, as an oatmeal stout that is. Do they know better? Some of them do. I’ll still drink this keg, sorry rose bush, you’re not getting this beer. I know this, but I wanted some feedback on it outside my circle of friends.

I hope this kind of put a bug into your ear about entering competitions and how they can help you brew better beer. If you only enter one a year, enter the War of the Wort next year, if you enter two, enter HBAMM’s Monster Mash, which will be held in the Oct/Nov time frame.

Cheers!

Albino Squirrel

If you have ever been to Starkville, MS then I’m sure you have heard of Strange Brew Coffeehouse. He has created this coffee house as a staple for StarkVegas. I decided that an attempt to take the flavors in his signature drink and put them into a beer. Yeah, what can be wrong about this, right? The Albino Squirrel has my wife by her reigns. If the thought of Strange Brew pops into her head she instantly think do I want it iced, frozen, or hot. Well, since I’ve been doing some more off the wall things lately with my brewing, I’ve decided I am going to try to recreate this.

For those of you who have no idea what an Albino Squirrel is. I apologize, you’re missing out. You’ll want to get to Starky ASAP, or when he opens his new location in Tupelo next year. It is a coffee drink with white chocolate and hazelnut. Now how in the world am I a going to get white chocolate in my beer? Well white chocolate is essentially cocoa butter, sugar and some milk solids. Well I’m not. My plan is to use cacao nibs in the secondary and then some awesome vanilla at kegging. This will not be exactly white chocolate flavor, but I think it will be pretty close.

Here are some notes at my attempt thus far.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 60 min 14.4 IBUs 4.2 SRM 1.053 1.015 4.9 %
Actuals 1.053 1.01 5.6 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Spice, Herb, or Vegetable Beer 21 A 1.03 - 1.11 1.005 - 1.025 0 - 70 5 - 50 2 - 3 2.5 - 12 %

Fermentables

Name Amount %
Pale Malt (2 Row) US 6 lbs 54.55
Barley, Flaked 2 lbs 18.18
Oats, Flaked 1 lbs 9.09
Cara-Pils/Dextrine 8 oz 4.55
Caramel/Crystal Malt - 20L 8 oz 4.55
Milk Sugar (Lactose) 1 lbs 9.09

Hops

Name Amount Time Use Form Alpha %
Northern Brewer 0.5 oz 60 min Boil Pellet 8.5

Yeast

Name Lab Attenuation Temperature
English Ale (WLP002) White Labs 67% 65°F - 68°F

Mash

Step Temperature Time
Mash In 156°F 45 min

Notes

Starkville Water Profile - Water machine in Wal-Mart
Batched sparged at 170 degrees.

Brewed on 9/20/2015

Cacao Nibs soaked in vodka, added after primary fermentation has finished.
Approx 24 oz of weak cold brewed coffee added at kegging
1 ounce of Bourbon Vanilla Paste added at kegging
2 ounces of Hazelnut Extract added at kegging.

Dry Hopped Golden Sour

2015-08-13 21.32.35My first attempt at a kettled-soured Berliner Weisse went awry. I tried to use the yogurt souring method that is posted on the Milk the Funk wiki. Living in the south where we are accustomed to 90+ degree days for two months I pick the one weekend to kettle sour a beer where the lows for the night are in the 60s, go figure right. I whipped up some starter wort and chilled it and then threw my flask into a water bath and turned on my sous vide heater. After about 24 hours I tasted the wort I inoculated, it was a clean yogurt like sour. I then proceeded to brew the Berliner. Brewed, pitched the soured starter, bubbled 30 seconds of CO2 into the wort, covered with plastic wrap, then the lid and forgot about it. The next day, I went outside to check on it, my wort was sitting at 70 degrees. Yes, it felt glorious outside, and a cold front coming through in August. *head slap* I let it sit one more day and it still tasted like sweet wort with just a twinge of sour in the background. *head slap* Well the expierement was watering my grass. Ahh, well. Yes it took me all this to tell you why I was brewing this “Golden Sour”. My all knowing self really believed that I had enough grains to brew another Berliner and use the Omega Yeast Labs Lactobacillus blend. I thought wrong. *head slap* Kitchen sink time, I already knew I wanted to brew this evening so here we go.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 60 min 0.0 IBUs 4.9 SRM 1.047 1.008 5.2 %
Actuals 1.046 1.01 4.7 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Style 1.035 - 1.055 1.008 - 1.015 10 - 30 2 - 10 2.2 - 2.8 2 - 5 %

Fermentables

Name Amount %
Pale Malt (2 Row) US 7.75 lbs 75.61
Barley, Flaked 1 lbs 9.76
Rye Malt 12 oz 7.32
Aromatic Malt 8 oz 4.88
Acidulated (Weyermann) 4 oz 2.44

Hops

Name Amount Time Use Form Alpha %
Meridian 2 oz 7 days Dry Hop Pellet 5.5

Yeast

Name Lab Attenuation Temperature
American West Coast Ale (BRY-97) Lallemand/Danstar 77% 59°F - 71.6°F
Lactobacillus Blend (OYL-605) Omega 72% 68°F - 95°F
Brevis/WLP011 European Ale Home 72% 64°F - 69°F

Mash

Step Temperature Time
Mash In 148°F 75 min

Notes

Brewed after work on a Friday evening.

Process:
----------
Chilled to approx 95 degrees. Called it good enough, pitched Lacto blend. Let it sit in my carport for approx 48 hours. Put the carboy in my fermentation chamber at 66 degrees. Let it cool down to ambient temp in the chamber then pitched the slurry.

2015-09-04 23.46.56After 3 or 4 days I noticed that I did not see any sign of fermentation. Hmmmm. This is not good. I checked my gravity and I was hovering around 1.038. Something needs to happen, because I’m ready to drink this beer.

I dug around in my fridge and found lots of dry yeast. I have way too much yeast on hand, but I decided to give it a go and pitch a pack of the Lallemand BRY-97. The next day I walk outside to check on the fermentation and I see signs! Whew! I let go for about 4 days, I check my gravity once again I’m sitting at 1.010. I go ahead and dry hop it and now it is almost ready to package.

2015-09-13 09.06.22Getting a dry-hopped sour ale has really challenged me. I guess this one of many reasons I brew. The sample I pulled tasted pretty good and I am really looking forward to this beer. These experiments have really kept me going lately.

“Bourbon Barrel” Aged Let’s Stout It Out (2015)

If you ask people about the style of beer that I’m most known for the answer will be an imperial stout. I have brewed one at least once a year for the past four years. Well this year has been no different. I brewed one in January and now this is my second iteration of Let’s Stout It Out this year. But I am putting a twist to this batch. I have some oak chips soaking in bourbon right now. I normally let my RIS go about 6 weeks in the fermenter. I’ll strain the bourbon off the oak chips and throw them right in, then will sample it every so often to make sure I don’t get too much bourbon character. I’m looking forward to enjoying this beer come Thanksgiving this year.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
6 gal 60 min 58.4 IBUs 51.6 SRM 1.092 1.027 8.6 %
Actuals 1.092 1.01 10.9 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Imperial Stout 13 F 1.075 - 1.115 1.018 - 1.03 50 - 90 30 - 40 1.8 - 2.6 8 - 12 %

Fermentables

Name Amount %
Pale Malt, Maris Otter 19 lbs 80.85
Roasted Barley 1.5 lbs 6.38
Special B Malt 1 lbs 4.26
Caramel/Crystal Malt -120L 8 oz 2.13
Caramunich Malt 8 oz 2.13
Chocolate Malt 8 oz 2.13
Pale Chocolate 8 oz 2.13

Hops

Name Amount Time Use Form Alpha %
Warrior 1.5 oz 60 min Boil Pellet 15.6

Yeast

Name Lab Attenuation Temperature
Edinburgh Ale (WLP028) White Labs 73% 65°F - 70°F
Scottish Ale (1728) Wyeast Labs 71% 55°F - 75°F

Mash

Step Temperature Time
Mash In 155°F 60 min

Notes

Longview Water Profile - Straight from the faucet through a carbon filter

Batched sparged at 170 degrees.

Brew day at my house with Ron. He brought his equipment and brewed a Lemon Lime Wit that day. This was my second brew for the Labor Day weekend.

2015-09-10 06.20.16I missed my numbers pretty badly with this beer. My SG should have been in the 1.085 range and I believe I was hovering around 1.075. My volumes were more like 7.75 gallons than 7.25. I boiled it hard for an extra 30 minutes or so to get my SG. That is when I put the hops in. I may have been a bit under my 5.5 gallons into the fermenter, but that is just fine.

Yes, I used two different yeast companies. I knew I wanted to brew this beer and I went to a LHBS and he did not have another vial of WLP028 so I bought the Wyeast smack pack off of him. 2000 mL starter for 3 days, cold crashed and then another 2000 mL wort on top of it. I had a nice healthy pitch for this beer. As you can see from the looks of my messy fermentation chamber. It blew the little white cap off of the carboy cap and I have beer in the bottom of the fermentation chamber. I just cleaned up the chamber from an exploding hefe. Yes, blow off tubes need to be use, but this is less than 5.5 gallons in a 6.5 gallon carboy, surely I had enough head space. No sir! I have brewed this beer 6 or 7 times and I have never had a blow up like this. First time for everything I suppose.
2015-09-22 07.37.419/27/2015 – Soaked 4 ounces of medium toast oak chips in bourbon for 3 weeks. Added everything that was in the mason jar to the fermenter.

Cucumber Saison

I have always been intrigued by adding cucumbers to a beer. Either a Kolsch or Saison would work very well. After listening to the Basic Brewing podcast (link to podcast) with Prairie Artisan Ales inspired the grain bill. Also I actually got to use the grains of paradise I bought a few years ago, even though it was just a few grams. Everywhere I researched, just a couple grams in a 5 gallon batch gets enough flavor to come through. I thought the grains of paradise would be a nice touch to the cucumbers and give it a touch of spice that was missing from a pervious batch. I threw in the ounce of citra at the end of the boil to complement the melon aspect of the hop variety. I believe the cucumbers and citra hops will pair well together.

I purchased the yeast from a small yeast company, Boutique Yeast. I found out about him through the Milk the Funk Facebook Group. It is a saison/brett blend yeast. This blend threw a lot of fruit and a little bit of brett funk. I made a saison earlier this summer using this and have throughly enjoyed the yeast character in. Which is why wanted to brew it another batch, but this time spike it with cucumbers. I did not save my yeast cake (like a dummy) from the previous batch so this batch will give me one more shot at saving it this time.The carboy on the right is the brett saison. Brett cider on the left.

I could not find much information any brett saisons with cucumbers. I’m sure a homebrewer has done this before, but a simple google search came up with a few posts asking for information. I have found a couple different ways of handing the cucumber with other people’s experiments. Talking with the owner of Crooked Letter Brewing Company he did a tincture with cucumbers and white rum to spike a keg of their Crooked Heffy which he says turned out quite well and the rum complemented the Heffey. I’m leaning towards making my tincture with vodka. That way I have all of the control of how much flavor actually goes into the keg of beer. The other way is to secondary the beer on top of peeled and seeded cucumbers. But that would mean I would have to try the beer daily to make sure the cucumber flavor did not overwhelm the beer which seems to have been a problem with a lot of other brewer’s attempt at such a beer.

I brewed this beer for the Starkville Arts Council yearly fundraiser, Forks & Corks & Taps. Previously this has just been an exclusive wine pairing with the local restaurants. This year they decided to add a beer element to the event since there are so many breweries popping up in the state of Mississippi. They asked the Golden Triangle Brewers to have a table at the event to represent the homebrew element which I thought is a really good touch and I wanted to bring them something that a local brewery may nor may not bring to the table.

All in all, to do an “experimental” beer for a prestigious event like this in my small little town I guess took a bit of gumption on my part. I’m surprised I just didn’t pull out something that was comfortable. Not this guy.

Following is my recipe and some of the notes I took so far.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 90 min 24.1 IBUs 4.1 SRM 1.049 1.010 5.1 %
Actuals 1.046 1.01 4.7 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Saison 16 C 1.048 - 1.065 1.002 - 1.012 20 - 35 5 - 14 2.3 - 2.9 5 - 7 %

Fermentables

Name Amount %
Pilsner (2 Row) Bel 8 lbs 80
White Wheat Malt 1 lbs 10
CBCC Candi- Blonde 1 lbs 10

Hops

Name Amount Time Use Form Alpha %
Hallertau 2.5 oz 60 min Boil Pellet 2.7
Citra 1 oz 0 min Boil Pellet 13.9

Miscs

Name Amount Time Use Type
Grains of Paradise 2.00 g 0 min Boil Spice

Yeast

Name Lab Attenuation Temperature
Brett Saison (BY-A) Boutique Yeast 72% 64°F - 69°F

Mash

Step Temperature Time
Mash In 148°F 75 min

Notes

Batched sparged at 170 degrees.

Yeast was prepared with a 2000 mL starter for a 5 days prior to brew day. The starter took a few days to take off, but once it did, it went off with a vengeance. I pitched the yeast about 12 hours after high krausen of the yeast starter.The picture in the post shows the beer at high krausen, or what I believe to high krausen. That is when I added the Blond Cascade Beer Candi Syrup. I didn’t do it during the boil because I tend to not stir the sugar good enough to get it off the bottom of the pot and it scorches.I did not use any whirlfloc with this beer also, why it is so murky looking. And my chiller decided to spring a leak. That means this bad boy got racked to the carboy as soon as possible and pitched my yeast the next morning.

August 6, 2015

Kegged the saison today. It was pretty tasty without the cucumbers. I started off with .5mL of cucumber vodka per ounce of beer to sample. The wife and I agreed that it was way too much cucumber. Next sample was .5mL of cucumber vodka to 2 ounces of beer. Was still a strong aroma and flavor. I liked it a lot. So that is what I went with. I spiked the keg with 175mL of the cucumber vodka and am carbing it up to serve at the event August 15th.